The bottle method will keep your orchid for a very long time. Here’s what to do and what to use. Below you will find a really effective tactic that you won’t want to miss. The main thing is to follow the steps in the presented mode. Everything you need to know about it.
In order to preserve plants such as the orchid for as long as possible, there is a very effective method that can be used for this purpose. A very valid technique that is appreciated by industry professionals such as gardeners. The bottle method will therefore offer you a longer shelf life for your orchid. Let’s see what it is exactly
Bottle method: How to keep an orchid plant in top condition
When it comes to orchids , most of us are probably interested in knowing how to take the best care of them. If you have orchids at home, it is actually important to know how to take the best care of them.
However, not everyone is able to do this, so after a short time you end up with completely ruined orchids and in some cases you even forget to water them.
But even those who devote themselves to the cultivation of their native plants with care and attention often need new techniques to improve the cultivation processes.
As in this specific case, regarding the success of orchid plants . Then here you will find all the useful information to be able to benefit from an orchid that will give you pleasure for a lifetime. And all this thanks to a recycling method that will also be of great use to you during the flowering phase of your orchids.
Bottle method: the initial stages of the process
Here we refer to a specific method and useful steps to achieve your goal. The bottle method.
With the bottle method, your orchid plants will last a long time without any problems.
To start this particular process, you will first need to get an empty plastic bottle . It is best to get one of those clear plastic bottles so you can see the inside perfectly.
This is an important aspect considering that the transparency of the bottle in this way serves to facilitate the penetration of light inside. The light that penetrates inside the plastic bottle is also used for the roots of the plant, so it is the main reason why it is advisable to choose a bottle made of this special material.
At this point you must remove the label that is placed around the bottle and proceed to the second step to obtain the second product useful for this method: the cutter .
For the latter, you will have to cut the entire middle part of the bottle until you have divided it into two parts, the bottom and the top with the cap.
Now we will take a simple candle and light it, then place a metal tip like that of a knife on the flame to heat it, alternatively a nail can also be used, this will help you to make holes in the bottle .
Once the tip is heated, you can use it to pierce the cap on the top of the bottle several times.
Heat the tip of the nail several times to drill more holes even in the highest part of the bottle, i.e. under the cap.
Continuation of the bottle process
At this point, the other part of the bottle is taken, that is, the lower one, and using the same method just explained, holes are made around the bottom of this part of the bottle.
The holes created will be used for the irrigation phase. Then it is necessary to take pieces of coal , such as those obtained by recycling from barbecues, and then place them in the lower part of the bottle.
Continue by running the base of a heated iron around the outside perimeter of the top of the bottle to soften it and then bring it back inside. This way the edges won’t be able to harm your orchids.
Take an orchid plant with ready-made substrate , place a bowl underneath and carefully remove the plant from the pot so as not to damage the roots.
Work the substrate with your hands, leaving the roots slightly exposed. Use the charcoal pieces and the mixed coconut fiber as a base for the plant in the bottle.
Place the bottle cap upside down on the ground and fill it with the charcoal pieces, which are rich in potassium, magnesium and other nutrients .
The charcoal is used to store moisture and also as fertilizer.
Final details about this method: a method with a thousand surprises
Then place the plant on this charcoal base . Then fill the bottle to the brim with the charcoal pieces.
Then insert some kind of stick that is connected to the plant to support it.
Then use the hooks that are usually attached to hanging vases to hang it on the top of the bottle.
Then try to water the plant without exaggeration and hang the vase made from the plastic bottle on the appropriate hook.
The nutrients contained in the charcoal promote the development and flowering of your orchid plant. With this method, your plant will last for a long time and remain in perfect condition .
In short, if you have reached this point, you have surely understood the importance of this method and the different steps you must take so that you can take care of your plant effectively and so that it lasts as long as possible.
This is definitely a method you should try and recommend! The results will be really visible and long lasting and your plant will benefit from it.
